| Aqua Proof - DRV |
| |
| Aqua Proof DRV is an acrylic polymer formulated for use in coatings on varieties of surfaces. It is a water proofing liquid incorporated in mortar preparations as a one component having high water proofing properties. The material is used on roof, terrace and walls to prevent water penetration. Even in the internal walls where water is rising, the use of the material seals the water ingress. |
| |
| Aqua Proof DRV imparts the following properties : |
- Water proofing
- Increases physical strenght. i.e. Tensile, Compressive, Shear & flexural strength
- Resistance against chemicals, Alkalis, Solvents
- Ultra violet resistance
- Imparts flexibility to mortar and concrete.
- Provides non porous surface.
|
| It dries rapidly and has good adhesion to old and new concretes, brick, wood, metals and many other receiving surfaces. |
| |
| Typical Properties |
| Appearance |
milky white liquid |
| Solid content |
45% |
| Specific Gravity |
1.1 |
| PH when packed |
8 to 9 |
| Minimum Film forming temp.(MFT) |
5 degree centigrade |
| Shelf Life |
1 year |
|
| |
| Uses of Aqua Proof DRV |
- Floor coating to improve impact resistance in industrial shades.
- Coating on Manglor Tiles roofs for water proof coating gives better strength and aesthetic look.
- Excellent adhesion with old & new concrete
- For the new concrete slab (use of 1 to 2% aqua proof DRV on the weight of the Portland cement used) a long and trouble free life is achieved.
- For leak proof over head tanks, Under ground tanks, Basement, Swimming Pools
- For Bathrooms, Toilet Blocks
- Filling Cracks & Joints
- Stops water penetration in internal & external walls
|
| |
| Recommended Ratio's (Parts) |
| Applications |
Aqua Proof DRV |
Water |
White & Gray Cement |
| Water proofing for (Roofs, Walls, Terrace, Bathroom, Toilet Blocks etc) |
1 |
1 |
4 |
| Mortar for plasters crack filling etc. |
1 |
1 |
5 |
|
| |
One kilo of the mixture of cement, sand and aqua proof DRV can coat 50 square feet of surface.
Direct coating of Aqua Proof DRV is recommended as a first coat and sub sequent coating mixture of cement, sand and Aqua Proof DRV gives best results.
Above mentioned consumptions are based on ideal servicing surface and shall vary on the degree of finish of the surface to be coated.
The above information is only a guide line but formulation can be adjusted as per the practical requirement.
One kilo of Aqua proof DRV is sufficient for coating 100sq feet of surface if used for direct coating.
|
| |
| Available in : 1 kg, 5 kg, 20 kg, 50 kg packs |
| |
 |
